Industry

Sales of electric mini forklift talk about how the break-in period with new fork

0

Published by NEWTON May 28,2020

The newly purchased electric mini forklift may not be very easy to handle, and many functions may be a little unskilled to operate, and it will take a while for the machine to run in. The sales of electric mini forklift should tell you that the new car should not carry too heavy cargo in the initial running-in period. Next, let's talk to you about what to do in the first 100 hours of the initial phase of the new car break-in, and how to maintain the new electric mini forklift.(mini forklift manufacturers)

 

mini forklift manufacturers

First carefully check whether there are any problems with the electric mini forklift. If problems are found, perform pre-inspection and maintenance in time according to regulations. Change the oil and lubricate earlier than specified. If the condition is normal, warm up the electric mini forklift before driving, regardless of the season. To avoid emergency braking and emergency steering during driving, the sales of electric mini forklift are recommended to start slowly. Do not run the engine at high speed under no load.(mini forklift manufacturers)

Electric mini forklift driving safely, the responsibility is greater than the sky! In order to reduce the occurrence of more electric mini forklift safety accidents, electric mini forklift sales hope that the majority of electric mini forklift drivers will keep in mind the following situations:(mini forklift manufacturers)

mini forklift manufacturers

1. People haven't settled firmly and will not start;(mini forklift manufacturers)

2. The safety equipment is in poor condition and will not be started;(mini forklift manufacturers)

3, the door is not closed and resolutely do not start;(mini forklift manufacturers)

4, the seat belt is not fastened, do not resolutely do not start;(mini forklift manufacturers)

5, the goods are not loaded, do not resolutely do not start;(mini forklift manufacturers)

6. The people on the foot pedal or fork station do not resolutely do not start;(mini forklift manufacturers)

7, the frame station people do not resolutely do not start;(mini forklift manufacturers)

8. The equipment is extremely long, high, and overloaded and will not be started;(mini forklift manufacturers)

9, succession without inspection and resolutely do not start.(mini forklift manufacturers)

mini forklift manufacturers

If the electric mini forklift has not been used for a long time, the sales of electric mini forklift suggest that the bearing should be lubricated once within two weeks of use. When adding lubricating oil, pay attention to squeeze out all the old oil with new oil and lubricate more than twice. Remember to clean the dirt on the oil cap, oil plug and grease nipple before lubricating the bearing to prevent the dirt from falling into the structure of the electric forklift.(mini forklift manufacturers)

mini forklift manufacturers

Another point is that electric mini forklift sales need to remind everyone to pay attention. When using a grease gun to lubricate the lubricant, press it to the joint of the parts until the lubricant is squeezed out. Replace seasonal lubricants or oils in summer or winter, and the performance of lubricated electric mini forklift can be optimized to improve work efficiency!(mini forklift manufacturers)

< >
Latest posts