Industry

Manual hydraulic forklift oil seal function and replacement installation method

0

Published by NEWTON May 28,2020

First, the manual mini forklift oil seal function.


The manual hydraulic forklift oil seal is located in the manual mini forklift cylinder. The manual hydraulic forklift cylinder is a mechanical component used to seal the manual mini forklift lubricant. The manual hydraulic forklift cylinder isolates the parts to be lubricated from the manual mini forklift transmission accessories from the output components, so that the manual hydraulic forklift is not allowed. Lubricating oil leaks.

mini forklift 1 


Second, manual mini forklift oil seal replacement conditions


1. Manual hydraulic forklift cylinder inner leakage


2, manual mini forklift cylinder oil seal repair kit damage and aging, manual hydraulic forklift oil seal, repair kit, seal ring, the general life is 2-5 years, manual mini forklift if installed is the import oil seal, then the service life can be longer. After the oil seal repair kit of the manual hydraulic forklift is damaged and worn, the manual mini forklift must be completely replaced with new ones. When replacing the new ones, it is best to choose the imported oil seals and O-rings and other imported parts, and it is recommended to connect the entire cylinder. The complete repair kit is replaced at one time. This will reduce the cost of manual hydraulic forklift repair and maintenance and reduce the stop rate of manual mini forklift.

mini forklift 2 


Third, the manual hydraulic forklift oil seal replacement method is as follows


1. First remove the brake springs at both ends of the cylinder of the manual mini forklift fitting or the brake screw, or remove the screw on the top of the manual hydraulic forklift cylinder.


2. Guide sleeves on one side of a Panasonic manual mini forklift or a guide sleeve, remove the seal ring of the guide sleeve and replace it with a new wear ring oil seal.


3. The piston rod inlet oil seal inside the manual hydraulic forklift cylinder is replaced with the manual mini forklift seal. If it is deformed or aged, it is difficult to remove. You can soak the sealing ring of the manual hydraulic forklift for 10 minutes.


Fourth, manual mini forklift oil seal installation method


The manual hydraulic forklift oil seal installation method is the reverse of the manual mini forklift removal method. However, it should be noted that whether the manual hydraulic forklift is replaced or installed, a dedicated manual mini forklift repair tool is required. When replacing or installing a manual hydraulic forklift, you must not rush to make it, otherwise it will easily damage the oil seal of the manual mini forklift.

< >
Latest posts