Industry

What are the tips for avoiding collisions between shelves and fork lift trucks?

0

Published by NEWTON May 28,2020

For how to deal with the collision between the shelf and the narrow aisle forklift, I believe many warehouse shelf managers have thought about the problem. After all, the fork lift trucks driving in and out will inevitably cause damage to the guardrail, shelf legs and pallets due to the operation or level of the fork lift trucks driver. This damage will scrape the plastic powder, which will cause the narrow aisle forklift to hit heavy The shelf car was destroyed. Here, for example, the worst stability and more widely used driving shelves are used to illustrate how the shelves and fork lift trucks should be matched to reduce collisions:

narrow aisle forklift 


1. Add a protective cover on the shelf legs or guardrails. However, although this method can reduce the damage of the narrow aisle forklift to the shelf, it provides a good opportunity for some fork lift trucks drivers with poor technical level, which makes it difficult for the management to judge the narrow aisle forklift driver. Operating level.

narrow aisle forklift 


2. When the warehouse is planned, the shelf manufacturer can be required to appropriately increase the width of the drive-in racking passage, and reserve some safety distance for the fork lift trucks driver in advance, so as to reduce the collision of the narrow aisle forklift on the shelf legs.
3. Install the tines on the fork lift trucks, which can effectively reduce the damage of the narrow aisle forklift to the edge and mid-angle of the pallet; however, whether this method is feasible or not, it is best to pass the safety test of the fork lift trucks manufacturer.

narrow aisle forklift 


4. In the narrow aisle forklift channel ground draw visual deceleration line instead of deceleration sign, many times, experienced forklift driver, driving forklift speed is relatively fast, there is a certain distance between the measurement gap and the actual gap in the visual, so the simple forklift deceleration mark may The effect is not very obvious.
In fact, in addition to the above four points, how to reduce the collision problem of the fork lift trucks on the drive-in rack, the most important thing is to ask the manager to improve the front
narrow aisle forklift training and improve the safety of the fork lift trucks driver before the narrow aisle forklift driver enters the service. Consciousness, on the other hand, after the fork lift trucks driver enters the post, it is necessary to strengthen the assessment of the narrow aisle forklift driver; and as a fork lift trucks driver, it is also necessary to constantly improve the technical level and safety awareness of the narrow aisle forklift driving, in order to fundamentally avoid fork lift trucks and shelves. The generation of collision problems.

narrow aisle forklift

< >
Latest posts