How to make full use of the efficiency of electric stacker?

When users use the  electric stacker to work, they naturally want to make the most of their functions. How to effectively use the pallet stacker?

Power stacker performance overview:

Electric stackers can be transported over long distances, double-sided pallets, and single-sided pallets.Pallet stacker is small in size, flexible in operation, easy to drive, economical and environmentally friendly, and is the first choice for enterprise units. The electric stacking vehicle has a weight range of 1t-3t and a lifting height of 1-3.5m. Power stacker adopts the imported pumping station and the driving wheel. The fork lifts smoothly and powerfully, and the handle assembly is responsive and controllable. Electric stacker is equipped with a large-capacity traction battery (combined type) to ensure a single charge and continuous operation for 5-8 hours. Pallet stacker has low voltage protection function, which can protect the battery under low voltage condition and prolong its service life. It is equipped with a large-capacity high-performance battery, with long-lasting power and superior traction. The battery can be separated from the car body for daily use. Battery maintenance.

First,  power stacker  must be operated according to the regulations.

1. Electric stacker must load the goods strictly according to the load curve, and must not be overloaded.

2. Please do a thorough operation check before using the pallet stacker every time to check whether the battery is short of water. It is strictly forbidden to use the battery in case of water shortage;

3. In the process of using the power stacker, it is strictly forbidden to use the electricity seriously. When the indicator on the body is displayed in the red light, it should be charged in time;

4. It is strictly forbidden to use single fork fork goods for electric stacker forks;

5. Regularly dust the interior of the pallet stacker to keep the body clean.

  Second, develop the habit of power stacker trucks that are regularly inspected.

1. The heat dissipation performance of the electric stacker engine is deteriorated at high temperature, and the temperature is too high, which deteriorates its power and economy.

2. Clean the water channel, remove the scale of the cooling system, and clear the heat sink of the radiator. Always check the tightness of the fan drive belt. (pallet stacker)

3. Appropriate adjustment of the power stacker generator regulator to reduce the charging current of the generator.

4. Pay attention to prevent the engine from overheating during the operation of the electric stacker. Pay attention to the indication reading of the coolant temperature gauge at any time. If the coolant temperature is too high, take measures to reduce the temperature. Pallet stacker should keep the amount of coolant. When adding it, pay attention to prevent the coolant from boiling and causing burns.

5. Always check the temperature and air pressure of the power stacker tires. If necessary, stop in a cool place. After the tire temperature is lowered, continue working. Do not use deflation or cold water to reduce the temperature and reduce the tire life.

6. Electric stacker should always check the braking performance to prevent the brake failure caused by the aging of the brake master cylinder or the sub-pump cup, the expansion deformation and the vaporization of the brake fluid.

7. Adjust the electrolyte density of the  pallet stacker  battery and unblock the vent hole on the battery cover to keep the electrolyte 10-15 mm above the separator, and add distilled water as appropriate.

Finally, it is necessary to maintain the power stacker at the right time.

1. After the electric stacker runs for one week, it is routinely maintained. The efficiency, life and safety of the pallet stacker depend on daily maintenance.

2. Before repairing the power stacker, unplug the power outlet and disconnect the power supply.

3. Electric stacker should turn off the forklift's key switch before opening the left and right lids or electrical system.

4. Before checking the hydraulic system, the pallet stacker should lower the fork and release the system pressure.

5. When the power stacker checks the oil leakage of the car body, please wipe it with paper or cardboard. Do not touch it directly with your hands. To avoid burns.

6. Please note that the oil temperature in the transmission or hydraulic system may be high. Electric stacker should be cooled first, then the gear oil or hydraulic oil should be replaced to prevent the oil from burning.

7. Pallet stacker adopts different grades of hydraulic oil, which damages the hydraulic components and affects the system capability. Therefore, when adding or replacing hydraulic fluid, pay attention to the use of a uniform grade.

8. Car body welding, to disconnect the electric power of the power stacker battery. Because welding current may enter the battery during soldering, to avoid this, turn off the battery.

9. Electric stacker hydraulic system should be filled with new cleaning oil.

10. When repairing the electrical system of the pallet stacker, if the metal contacts the energized electronic components, it may cause short circuit or combustion. So take off your watch, earrings or other accessories.