How to maintain the motor of electric forklift?

The electric forklift is a storage and logistics equipment powered by motor. Therefore, the motor is very important for the electric forklift. Motor is an electromagnetic device that converts or transfers electric energy according to the law of electromagnetic induction. It can be divided into DC motor and AC motor. However, no matter what kind of motor, pay attention to maintenance. Now, the electric forklift manufacturer will tell you how to maintain the motor of the electric forklift.

In the process of driving a electric forklift, the driver should try to avoid excessive acceleration or deceleration. In case of sudden rapid driving, the motor will be vulnerable to the impact of large current, resulting in a sharp reduction in its life. Moreover, the motor must be kept dry at all times to avoid permanent damage to the motor. The driver should remember that every 5000KM of electric forklift, it is necessary to ask the maintenance personnel to check and clean the carbon brush. The electric forklift manufacturer reminds that if the working environment of the electric forklift is wet or there is much dust, it is better to increase the detection frequency.

When replacing the carbon brush of the electric forklift, it is necessary to clean up the accumulated carbon and polish the commutator surface as appropriate. After replacing the carbon brush, there will be a running-in Period of 1000KM, during which the driver must not accelerate too fast. In addition, there is a spare part in the motor that plays a protective function called the hand brake power off device, which is very important to protect the driver's work safety. Therefore, the hand brake protection device should be checked frequently for damage. Some people may see that there is still a large gap under the hand brake protection device, which is used to hold debris. This must be avoided because it is easy to cause failure of the hand brake switch. The electric forklift manufacturer reminded that the motor terminals should also be checked regularly for tightness.

As the power source of electric forklift, the importance of motor is self-evident. The driver must regularly check and maintain the motor. Do not wait for the motor to be damaged before repair or replacement. This is time-consuming and laborious, which seriously affects the working efficiency. The electric forklift manufacturer reminds that enterprises should also understand that no matter what the price of a electric forklift is, it cannot be done once and for all. Regular maintenance is required to extend the service life of electric forklifts.