electric forklift manufacturers china counts 10 details of operation of electric

The use of electric pallet truck stacker is not unfamiliar to the staff of warehousing, transportation and port, and can even be said to be a very familiar "partner", because some handling work is inseparable from electric forklift manufacturers china's electric forklifts, so many Driver friends are already familiar with some things about forklifts. But do you really know enough? Let's take a look at the top 10 precautions for forklift operation.
1. Be prepared before entering the high temperature weather. When using lubricating oil, pay attention to cleaning up the original winter lubricating oil such as the drive motor, engine, and transmission device. After cleaning, it needs to be replaced with special lubricating oil for summer.
2. The electric pallet truck stacker should always check the temperature and air pressure of the tires. If the temperature is too high, you should find a cool place to turn off the flame and wait for the temperature to drop. After the temperature drops, you can continue left and right. electric forklift manufacturers china remind everyone that when taking cooling measures, you should not be too extreme. Impulsively sprinkle cold water on the venting machine, otherwise it will cause damage to the machine.
3. electric forklift manufacturers china remind everyone to check the braking performance of the forklift frequently. At this time, in order to prevent the failure of brake failure caused by the aging, expansion and deformation of the brake master cylinder or sub-cylinder cup, and the vaporization of the brake fluid, make appropriate adjustments. Generator regulator.

4. The electric pallet truck stacker should also frequently check the tightness of the fan drive belt, clean the water channel, remove the scale in the cooling system, and dredge the radiator fins of the radiator.
5. In the process of using the equipment, electric forklift manufacturers china recommends to pay attention to avoid overheating of the engine and pay attention to the index of the coolant temperature gauge at any time. If the coolant temperature is too high, take cooling measures in time, and pay attention to prevent the coolant from boiling and causing burns when adding coolant.
6. Try not to run the electric pallet truck stacker in the open air in rainy days or wading in water.
7. Keep the vehicle clean, wipe the body with a semi-damp cloth, do not wash it with water; keep the battery part clean, open the battery cover completely when charging, and keep it dry and ventilated.
8. Adjust the density of the battery electrolyte of the electric pallet truck stacker, and unclog the ventilation holes on the battery cover. Electric forklift manufacturers china recommends that the electrolyte be 10-15mm higher than the separator, and add distilled water as appropriate.
9. Avoid high-frequency use, electric forklift manufacturers china recommends that the car cool down naturally in a ventilated place for about 45 minutes after continuous use for 4-6 hours.
10. The driver of the electric pallet truck stacker should ensure adequate sleep and keep energetic before working. If you feel tired, lethargic, unresponsive, etc. during work, you should stop and rest immediately to ensure driving safety.
-
Common Hydraulic Faults & Troubleshooting for Manual Pallet JackSort out frequent faults of manual hydraulic pallet trucks, including weak lifting, automatic sinking, failure to lower and oil leakage. Explain causes and simple maintenance methods to reduce warehouse equipment maintenance costs.Do you like ?0
Read more -
Price Factors of Walk-Behind Counterbalance StackerAnalyze price factors of walkie counterbalance stackers. Mast height, battery, controller and attachments cause price differences, with quotation ranges for 1t/1.5t/2t models.Do you like ?0
Read more -
Diesel Forklift Manufacturer | Newnewton Forklift SupplyNewnewton factory supplies 1-5t standard diesel forklifts, supports custom models over 10 tons. Equipped with China IV & Euro engines for construction yards, various attachments optional.Do you like ?0
Read more -
Main Components of Stand-On Electric Reach StackerRider reach stackers suit high stacking within 2m narrow aisles. This article explains five core components including chassis, reach mast, hydraulic and electric control systems for procurement and daily maintenance.Do you like ?0
Read more -
Application Scenarios of Portable & Self-Lifting StackerPortable self-loading stacker works without loading dock or ramp, realizing truck pallet handling independently. Suitable for urban logistics, dock-free factories, temporary construction sites and floor warehouses.Do you like ?0
Read more -
Weak Lifting Failure of Stand-On Counterbalance Stacker & Repair SolutionsStop operation immediately if rider counterbalance stacker has weak lifting. Sort out failure causes of hydraulic system, wiring and mast components, with matched maintenance steps to eliminate warehouse safety risks.Do you like ?0
Read more



