How to charge the electric hydraulic forklift correctly?

Electric hydraulic forklift is a very common storage and logistics equipment. Because it is driven by the battery, how to maintain the battery is very important for the electric forklift. Among them, the most critical link is charging. Proper charging is a skill that forklift operators must master in obtaining forklift certificates and daily work. Next, Jiangsu electric forklift manufacturer will tell you about the rules and requirements for correct charging.

It is not uncommon to mention the safety problems of electric hydraulic forklift in the news. A fire broke out in a building materials factory in Xiamen, and Xiamen mobilized 32 fire engines to put out the fire. According to the investigation, the cause of the fire was the fault caused by the charging process of the electric forklift in the factory. When charging, forklift operators should pay attention to the following points: when charging the electric forklift, you must keep good ventilation, and it is prohibited to smoke or use open flame beside the electric forklift. If you need to answer or make a call, you'd better go outdoors. Enterprises should install eyewash sprayers in the charging area to prevent electrolyte leakage from accidentally entering the eyes. Jiangsu electric forklift manufacturer remind enterprises that they should also configure sufficient fire extinguishers and other fire-fighting equipment.

Dirt and impurities are not allowed to enter the battery of electric hydraulic forklift, only distilled water can be added. After each charging, check whether the distilled water in the battery is sufficient. After adding water, the battery surface shall be wiped clean and kept dry. Pay attention not to use or place conductive materials on the battery terminal to prevent short circuit or even fire. If it is necessary to unplug the plug during charging, be sure to disconnect the power supply before unplugging the plug to avoid electric shock. The battery shall not be entangled with the charging wire, and the insulating part shall not be corroded or damaged. Jiangsu electric forklift manufacturer reminded that rubber gloves should be worn to ensure safety when checking or maintaining the battery.

The state has also made many regulations on the charging of electric hydraulic forklift. Enterprises and forklift workers can learn from the regulations issued by the state. If there are problems with storage and logistics equipment in terms of battery maintenance, battery charging, etc., you can consult the Jiangsu electric forklift manufacturer.