How to maintain the battery of an electric pallet jack?

As we all know, the electric pallet jack is a logistics storage equipment driven by electricity, so the battery is very important for it. Maintaining the battery well and prolonging the battery life are conducive to saving costs and improving work efficiency. How do we do our best to maintain the battery? The pallet jack manufacturer came to tell us about it.

Before each use, check whether the battery in the electric pallet jack is sufficient. If it is used for the first time, in order to meet the work requirements, the electric pallet jack must be charged before it is put into operation. If the battery needs to be replaced, replace it with a battery that matches the model of the primary battery and has the same weight. The weight and size of the battery shall not be changed at will, or it will affect the center of gravity of the electric pallet jack. The pallet jack manufacturer told us that if the battery is not suitable, it will affect the stability and braking capacity of the electric pallet jack.

The battery of an electric pallet jack contains high voltage electricity and energy. Be careful not to short-circuit the battery. During the maintenance or repair of the electric pallet jack, the power supply shall be cut off. Do not smoke or use an open flame when charging an electric pallet jack. Moreover, the original charger provided by the pallet jack manufacturer must be used to charge the battery. Be careful not to overcharge or over discharge, otherwise the battery life will be shortened. When charging the battery, try not to be in a closed place and keep good ventilation. In the process of charging, if it encounter water, open fire, electric spark, etc., the electric pallet jack may explode, so you must be careful. The pallet jack manufacturer reminds that after charging, the charging power of the electric pallet jack should be disconnected before unplugging the power socket.

After using the electric pallet jack, it must be charged as soon as possible, and the storage time shall not exceed 24 hours. electric pallet jacks that have not been used for a long time also need to be charged regularly. When charging, connect the charging plug of the electric pallet jack to the appropriate power supply (220V 50HZ), and turn on the AC power switch to charge. If the electric pallet jack from the pallet jack manufacturer is used, the charging will be more convenient and safe, because it is equipped with a full intelligent fast charger, which can be perfectly charged without supervision, extend the battery life, avoid potential safety hazards, and is very easy to operate. If you are interested, welcome to consult.