What are the points to pay attention to when repairing the forklift manual?
Forklift manual is the most common tool in logistics handling operations. The application range of hydraulic hand trolley is very wide. Forklift manual can be used for postal, airport, warehouse, workshop, supermarket, logistics, express delivery, factory, printing, shopping malls and other occasions to carry goods, it is difficult to leave the hydraulic hand trolley assistance.
With the different changes in the process of social and economic development, the manual requirements for forklift manual are also changing. Many enterprises have personalized demand for hydraulic hand trolley. Slowly on the market: light hydraulic forklift manual and super heavy hydraulic hand trolley, ultra-short hydraulic forklift manual, extended hydraulic hand trolley, paper forklift manual, low-release hydraulic hand trolley, electronic scale forklift manual, stainless steel and galvanized hydraulic hand trolley, etc., constantly to meet different customers for forklift manual demand.
Although the types of hydraulic hand trolley are various, their core components are hydraulic systems, and they all face the problems of maintenance and repair during use. Let us share with you today, pay attention to maintenance and repair of forklift manual. A few key components?
1. Hydraulic hand trolley oil pump:
If the manual oil pump of the forklift manual, the hydraulic hand trolley can not be used manually, and the manual operation of the forklift manual can ensure that the oil pump can work normally, such as: the manual dust ring of the hydraulic hand trolley, the manual O-ring of the forklift manual, Manual steel ball for hydraulic hand trolley. If you see that the forklift manual is manually worn and damaged, you should replace it with new ones to avoid inconvenience for subsequent use.
2. Hydraulic hand trolley cylinder:
The manual cylinder of the forklift manual plays a key role in the lifting of the cargo. If the cargo is overloaded or eccentric, the piston rod and the cylinder are damaged, or the piston rod is exposed for a long time to cause rust, or the position of the nut below the manual cylinder of the hydraulic hand trolley is not correct adjustment may cause the forklift manual fork to not rise or fall, so use the hydraulic hand trolley.
3. Forklift manual oil seal:
The manual oil seal of the hydraulic hand trolley, the sealing of each component is good. It depends on the manual cylinder of the forklift manual. Recently, some users have consulted the manual cylinder of the hydraulic hand trolley. Most of this situation is a problem with the seal of the oil seal, then check to replace a seal with a good seal.
4. Forklift manual wheel:
The manual wheel of the hydraulic hand trolley is directly in contact with the ground, so it is still relatively worn during long-term handling. The manual wheel of the forklift manual is now basically a nylon wheel, and its wear resistance is A little bit worse, but relatively speaking, the price is still relatively cheap. There are also cost-effective wheels such as rubber wheels and polyurethane wheels, so customers can choose which wheels to use when purchasing hydraulic hand trolley.
5. Forklift manual lever frame:
The manual lever of the hydraulic hand trolley serves as a balance and support. The manual lever of the forklift manual is connected to the cylinder and the push rod. The support force and balance force of the manual lever frame of the hydraulic hand trolley are also limited, so it is best not to overload or eccentrically load the cargo, so as to avoid the breakage or deformation of the manual lever frame of the forklift manual.
-
Scissor Aerial Work Trucks: Improving jobsite efficiency and safety
In modern construction sites, scissor aerial work platforms are widely popular because of their economy and practicality. Compared with traditional scaffolding, it significantly improves construction efficiency and reduces labor costs. Comparison of scissors and scaffolding
Do you like ?0
Read more -
The whole family of trucks is revealed, who is the king?
The aerial handling vehicle family, including lifting platform trucks, articulating boom trucks, stacker trucks, self-lifting trucks and four-wheel forklifts, each has its own merits, let's take a closer look at their characteristics and application scenarios.
Do you like ?0
Read more -
Lifting platform truck, high-altitude construction efficient weapon
As a pioneer in the field of aerial work, lifting platform trucks play an indispensable role in the construction industry. Its excellent safety and stability help construction workers to complete high-altitude work safely and e...
Do you like ?0
Read more -
Outdoor aerial work: off-road lifting platform truck
With the rapid development of science and technology, the lifting platform truck has become a popular mechanical equipment for aerial work, convenient and efficient is its characteristics, and more importantly, it can ensure th...
Do you like ?0
Read more -
Stand-on forklifts: the right-hand man for small warehouses
Few vehicles are better suited for navigating narrow warehouse aisles than stand-up forklifts. They are shorter, more compact, and have a smaller turning radius than their seated counterparts. This makes the forklift more maneuverable a...
Do you like ?0
Read more -
Reach trucks and their features and differences