How to maintain the electric forklift supply in the summer and autumn season?
The hot summer has passed, and the temperature in the autumn has gradually turned cold and the climate has changed significantly. During the summer and autumn seasons, electric forklift truck manufacturers should pay special attention to maintenance during use. The maintenance of electric forklift supply in this season should be as follows:
1. External maintenance of electric forklift truck manufacturers
In the morning and evening, there are many dews. The surface of the electric forklift supply is often very wet. If the body of the electric forklift truck manufacturers has obvious scratches, it should be painted in time to avoid the rust and corrosion of the scratched parts. Due to the corrosion of rain acid in the rainwater in summer and the direct sunlight in the summer, the paint surface of the electric forklift supply will inevitably be oxidized. In the season, you should do a cleaning and refinishing work for the surface of the electric forklift truck manufacturers.

2. tire maintenance
In the safe driving of electric forklift supply, tires play an important role. In the summer, due to the high temperature, always check the air pressure of the electric forklift truck manufacturers tires. Do not make the tire pressure too high, otherwise, there will be a risk of puncture. In the fall, due to the relatively low temperature, the electric forklift supply tires should be filled with air pressure, in order to keep it within the specified air pressure range, at the same time, it should also check whether the electric forklift truck manufacturers tire has scratches, because the rubber is easy to harden in the autumn and winter, and it is more brittle. The tire is easy to leak, even the tires, and the tires should be cleaned frequently inclusions in the grain.
3. Engine compartment maintenance
The oil, brake oil and antifreeze in the engine compartment of the electric forklift supply should be checked to see if the oil is sufficient, whether it has deteriorated, and whether it has reached the replacement cycle. These oils are like the blood of an electric forklift truck manufacturers, it must be replaced during the replacement cycle to ensure the oil the circulation of the liquid is smooth.

4. Maintenance of the brake system
The temperature difference between day and night in autumn is large, which may lead to expansion and contraction deformation of the body parts of electric forklift supply. Always check whether the brakes of electric forklift truck manufacturers are weak or deviated, whether the pedaling force of the brake pedals of electric forklift supply changes, and if necessary, clean the entire electric forklift truck manufacturers the piping section of the brake system.
5. Battery maintenance
The electrode wiring of the electric forklift supply battery is the most problematic place. If it is found that there is green oxide at the electrode wiring of the electric forklift truck manufacturers, it must be cleaned up in time. These green oxides will cause the electric forklift supply generator to have insufficient power. It will also cause the battery to be scrapped.
I would like to remind everyone that when you turn on an electric forklift truck manufacturers, you need to pay more attention to it and prevent it from happening.
-
Reliability Of Newnewton Warehouse Forklifts For Heavy-Duty ShiftsWarehouse forklift reliability relies on industrial parts, reinforced frames and factory durability tests. Proper operation and maintenance reduce unexpected downtime.Do you like ?0
Read more -
Forklift Configuration Strategy For Dense Warehousing, Warehouse ForkliftDense warehousing needs matched forklifts besides racks. Reach and trilateral stackers fit different layouts, coordinate aisle, load curve and floor for smooth handling.Do you like ?0
Read more -
Full Container Supply For Export Forklifts, Forklift ManufacturerBulk forklift orders for overseas can ship by FCL or LCL. Newnewton FCL offers stable freight, safer packing and mixed models for large purchases.Do you like ?0
Read more -
Stand-on Reach Stacker For Narrow Aisle Stacking, Mast Reach StructureStand-on reach stackers feature sliding masts that stay outside racks. They boost storage density in narrow aisles and require flat floors and standard pallets.Do you like ?0
Read more -
Stand-on Counterbalance Stacker For Various Pallets, Why No Leg RestrictionCounterbalance stackers have no front outriggers, using rear counterweight to avoid pallet interference. They fit various odd pallets yet need wider warehouse aisles.Do you like ?0
Read more -
Custom Walk-Behind Counterbalance Stacker | Non-Standard ModificationsStandard walk-behind counterbalance stackers struggle with non-standard pallets and tight aisles. Customize load, lift, forks and structure, share working conditions for safe design.Do you like ?0
Read more



