why is the malfunction of the travel motor of the forklift truck manufacturers?

In the use of forklift suppliers, special attention should be paid to the running condition of the traveling motor. In the following cases, the cause of the failure of the forklift truck manufacturers should be eliminated in time: the forklift suppliers cannot be started. It may be caused by a blown fuse, a faulty control line, a severe short circuit or open circuit of the motor winding, a short circuit between the commutator segments, poor brush contact, excessive load or mechanical damage to the bearing.

1, the forklift truck manufacturers speed is not correct

It may be caused by short-circuit or open circuit of the winding of the forklift suppliers, improper brush position and overload of the forklift truck manufacturers, bearing damage, and low power supply voltage.

2, forklift suppliers brush sparks

It may be caused by poor brush contact of the forklift truck manufacturers, uneven surface of the commutator, improper brush position, unclean surface, short-circuit of the commutator piece, or short-circuit of the motor winding of the forklift suppliers.

3, forklift truck manufacturers produces high temperature

It may be caused by overload of forklift suppliers, too tight bearing or oil seal, damage or poor lubrication, shaft core misalignment, armature and magnetic pole phase friction, winding short circuit, excessive brush pressure, improper position, poor rectification, etc.

4, forklift truck manufacturers has noise

Mainly due to bearing damage of the forklift suppliers, uneven surface of the commutator, vibration or friction of the brush.