As the name implies, electric forklift is a mechanical vehicle driven by battery. It is widely used in various industries because of its environmental protection, simple operation, durability and high cost performance. Therefore, the battery is very important for the electric forklift. The good operation of the battery can greatly improve the working efficiency of the electric forklift. If you want to ensure the good operation of the battery, you must always pay attention to the battery and maintain the battery. So, what should be paid attention to when storing the battery? Electric forklift manufacturer says so.

The driver of the electric forklift shall pay attention to observe whether the battery is short of water, replenish distilled water in time, and avoid using drinking water normally, otherwise the battery will be damaged. If a electric forklift is not used for a long time, the battery should be fully charged and stored, and recharged every 1-2 months. If the forklift is to be operated continuously for multiple shifts, it is necessary to prepare a standby battery to prevent the battery from running fast, causing loss to the battery and shortening the battery life. In order to avoid affecting the charging of the charger and damaging the chopper due to over voltage generated by the charger, the electric forklift manufacturer reminds that the charging circuit must be completely separated from the chopper when charging the battery.
When storing the electric forklift battery, it shall not be placed horizontally. Because the battery contains 22% - 28% dilute sulfuric acid, the positive discharge battery can ensure that the electrolyte covers the electrode plate and leaves a certain space. If it is laid horizontally, part of the electrode plate will be exposed and the electrode plate will be damaged. Moreover, the horizontal discharge battery is likely to cause the electrolyte to flow out from the exhaust port of the battery. In addition, when the battery is short of power, it must be charged in time, but do not charge too frequently or for too long. It is better to charge regularly. The electric forklift manufacturer recommends charging once a day or twice a day.

The battery is the key part of the electric forklift, but it is very easy to be damaged and its life is easy to be reduced. Therefore, the driver should pay more attention to the storage of the battery. There are rules and requirements for many minor places, and carelessness is not allowed. The electric forklift manufacturer suggests that maintaining the battery of the electric forklift can greatly reduce the use cost of the electric forklift, ensure the working efficiency of the forklift and protect the safe operation of the driver.
-
Anti-Slip 2WD Diesel Rough Terrain Forklift for Unpaved GroundRough sites need high-ground-clearance 2WD rough-terrain forklifts. Diesel power prevents slipping and bottoming for outdoor loose ground handling.Do you like ?0
Read more -
Cold Storage Narrow Aisle Stacker, Direct Supply for Cold Chain WarehousingCold storage narrow aisle stackers come with factory low-temp protection against condensation, better than simple retrofits for frozen food and pharmaceutical cold chains.Do you like ?0
Read more -
When to Choose Stand-on Electric Double Pallet StackerChoose between double pallet and standard stackers by aisle and load per trip for e-commerce and transfer warehouses to avoid inefficient equipment.Do you like ?0
Read more -
3 Key Parameters to Select Small Stand-on Electric Pallet TruckFor compact stand-on pallet trucks, turning radius, load and battery are core specs. Match aisle, frequency and budget to avoid poor site adaption.Do you like ?0
Read more -
What Aisle Width Is Required for Safe Stacking of Walk-behind StackerWhen choosing walkie stackers, Ast (right-angle stacking aisle) matters more than body width. Differentiate stacking aisle from straight passage and leave extra space.Do you like ?0
Read more -
Silent Version Walk-behind Straddle Electric Stacker for Clean WorkshopSilent walkie straddle stackers reduce noise from motor, hydraulics and wheels for quiet workshops in electronics, medical and precision manufacturing.Do you like ?0
Read more



