What to do if positive pole of self loading pallet stacker battery is blurred?

Self loading pallet stacker is a mechanical vehicle powered by electricity, so battery is very important for self loading pallet stacker. As we all know, it is necessary to connect a charger to charge the mobile phone, so is the charging of the self loading pallet stacker. Charging the battery needs to be carried out on the charger. When connecting the most traditional charger, the driver must pay attention to connecting the positive pole of the battery to the positive pole of the charger, and the negative pole of the battery to the negative pole of the charger. Generally, the positive and negative poles are marked on the battery. However, if the positive and negative signs on the battery are blurred, how can we distinguish them? Next, the stacker manufacturer will tell you about it.

Generally, the positive pole on the battery of self loading pallet stacker will be indicated by "+", and the negative pole will be indicated by "-". Some batteries use red to indicate the positive pole. If you are not sure, you can try to connect it before opening the charger switch. If the voltmeter swings forward, it is correct. If the marks of the positive and negative poles are blurred, we can use the following methods to distinguish them. The first method is to observe the color of the pole. However, for all used batteries, the positive pole will be dark brown and the negative pole will be cyan gray. The second method is to connect the pole of the battery with a DC voltmeter. If the pointer swings in a positive direction, it means that this pole is a positive pole. The stacker manufacturer will tell you the last method. We can use the electrolyte for electrolytic identification. Two wires are drawn from the two poles of the battery and placed close to each other in the electrolyte. The end around the wire that produces more bubbles is the negative pole.

We must pay attention to the fact that the two poles of the battery of the self loading pallet stacker must not be connected reversely, otherwise the charger or battery will be damaged. The charger shall be installed in a ventilated, dry place without open fire, corrosive gas and strong magnetic field interference. It should be used in places where the temperature is between - 10 ° C and 50 ° C and the altitude is less than 1000 meters. The stacker manufacturer reminded everyone that when charging, you should first connect the plug of the battery and then connect the power supply. In case of power failure, cut off the power supply first, and then unplug the battery.

This is the method to distinguish the positive and negative poles of the battery of the self loading pallet stacker, and the precautions for using the self loading pallet stacker charger. The stacker manufacturer reminds everyone that charging is an important thing for the self loading pallet stacker, which requires the driver to operate in a standardized manner and pay more attention, otherwise there will be safety problems, damage the self loading pallet stacker and even hurt the driver. The self loading pallet stacker produced by stacker manufacturer is equipped with an intelligent charger, which can be safely charged without supervision and automatically powered off with a light plug. Enterprises in need can consult.