How to assemble the gantry and fork frame of a stacker forklift for sale?

Stacker forklift for sale is a very popular forklift nowadays. It has high flexibility, high horsepower, simple operation and easy to learn, and its maintenance is much easier than other forklifts. Even so, it may have minor problems. If the gantry and fork frame have problems, it will bring us a lot of inconvenience. In order to save costs, some drivers will choose to dismantle and repair the forklift by themselves to put it into operation as soon as possible. It is easy to remove and difficult to install. How to assemble the gantry and fork frame of a stacker forklift for sale? The electric forklift manufacturer comes to talk to you.

First of all, pay attention to the front and rear clearance of the inner and outer gantries of the stacker forklift for sale. When selecting the roller, select the roller with a clearance of less than 1mm for assembly. During assembly, after determining the appropriate clearance, operate the lifting handle to let the inner gantry run up and down. The electric forklift manufacturer told us that the gantry should run smoothly and the rollers should rotate freely, smoothly and evenly.

Then, we should pay attention to the left and right clearance of the inner and outer gantries of the stacker forklift for sale. The installation position of the lateral roller shall be adjusted by adding or removing shims according to the required size to ensure that the clearance between the roller and the inner and outer walls of the channel steel of the inner and outer gantries reaches the standard. When the inner gantry is at the highest position, the clearance is 0.1~1.0mm. The electric forklift manufacturer told us that when the inner gantry is at the lowest position, the clearance is 0.1~1.0mm.

Then, let's have a look at the left and right clearance of the fork frame of the stacker forklift for sale. The adjustment method of the left and right clearance of the fork frame is the same as that of the inner and outer gantries, except that the standard clearance value is 0.1~1.0mm. After adjustment, ensure that the lifting fork frame and inner gantry operate stably. The electric forklift manufacturer told us that if the inner and outer gantries can not connect with the forks and fall freely when lowering from the maximum height, they should be readjusted.

The above is the method for assembling and adjusting the gantry and fork frame of the stacker forklift for sale. During installation, everyone must pay attention to the clearance between the roller and the inner and outer gantries and forks, which determines whether the inner and outer gantries and forks can move normally. The electric forklift manufacturer reminds everyone that inspection and adjustment must be carried out after the final installation.