Before using a manual hydraulic forklift, you must know these things

　　 Manual hydraulic forklift is a dual-purpose vehicle for loading and unloading and short-distance transportation. It has the characteristics of balanced lifting, flexible rotation and convenient operation. It is an indispensable auxiliary tool for material handling and is commonly used by enterprises.

　　 Safety check before use

　　 1. Check whether the hydraulic cylinder of the manual hydraulic forklift is leaking before use

　　2, check whether the hydraulic lifting device of the manual hydraulic forklift is effective before use

　　 3. Before use, check whether the six casters of the manual hydraulic forklift are entangled with foreign matter and remove them in time.

　　 4. If any of the above inspections fails, the use of manual hydraulic forklifts is prohibited.

　　 Cargo

　　 manual hydraulic forklift fork lift

　　 Turn the pressure relief valve on the control handle of the manual hydraulic forklift to the down position, press the direction handle up and down to raise the fork of the manual hydraulic forklift. Squeeze the pressure relief valve upward, and the fork will drop.

　　 pull goods

　　The weight of the goods shall not exceed the weight limit of the manual hydraulic forklift. After the manual hydraulic forklift lifts the goods off the ground, turn the manual hydraulic forklift control handle to the neutral position to drag the goods. Do not run when pulling the goods, you need to move slowly.

　　 pressure relief

　　 After pulling the goods to the destination, turn the control handle of the manual hydraulic forklift to the upper position to release the pressure of the manual hydraulic forklift until the goods land.

　　 dry run

　　 When the truck is empty, the manual hydraulic forklift should be properly lifted to prevent the front axle support frame from contacting the ground.

　　Safety Notice

　　1. The manual hydraulic forklift can only be operated by one person, and one person must command when it is operated by multiple persons.

　　2. When loading the manual hydraulic forklift, overloading, partial loading and single fork operation are strictly prohibited. The weight of the loaded items must be within the allowable load range of the manual hydraulic forklift. Please make sure that the fork length of the manual hydraulic forklift is greater than or equal to the pallet length. length.

　　 3. manual hydraulic forklifts are not allowed to stand for a long time and store items with heavy loads.

　　 4. It is strictly forbidden to drop the goods from a height onto the manual hydraulic forklift.

　　5. The fork of the manual hydraulic forklift must be completely placed under the shelf to fork the goods, and the goods can be pulled after keeping the goods stable.

　　 6. The manual hydraulic forklift is strictly prohibited to load unstable or loosely packaged goods. If necessary, personnel must be arranged to provide support.

　　7. When the manual hydraulic forklift is carrying high and low loads, the fork should be as low as possible to prevent the goods from falling.

　　 8. Do not place any part of your body close to the mechanical lifting parts of the manual hydraulic forklift, above the loaded goods and below the forks.

　　 9. When operating a manual hydraulic forklift, it is strictly prohibited to drive too fast and slow down when turning.

　　 10. It is strictly forbidden to operate manual hydraulic forklifts on slopes or steep slopes. If it is necessary to use the manual hydraulic forklift on a slope, the operator shall not stand directly in front of the manual hydraulic forklift, so as to avoid the inertia of the manual hydraulic forklift from overspeeding and hitting people.

　　11. The manual hydraulic forklift is strictly forbidden to carry people on the landslide or slide at will.

　　 12. It is strictly forbidden to operate the manual hydraulic forklift when the sight of the operator is blocked.

　　 13. Do not use the manual hydraulic forklift on muddy and uneven ground. When using a manual hydraulic forklift, pay attention to the passage and environment, and do not hit other people, equipment and other objects.

　　14. When the manual hydraulic forklift is not in use, the unloaded fork must be lowered to the lowest position and stored in the designated location

　　 15. The users of the manual hydraulic forklift must be maintained regularly, and the department management personnel must arrange for regular maintenance or repairs.

　　 16. The damaged manual hydraulic forklift must be repaired or scrapped. The use of manual hydraulic forklifts for operations is prohibited.