Is electric pallet jack safe? How to achieve safe operation?

Electric pallet jack is a warehousing and logistics equipment used for cargo transportation. Enterprises must have many factors to consider when selecting warehousing and logistics equipment, among which safety is the key factor. Not only electric pallet jack, but also enterprises will consider whether they are safe when purchasing electric forklift and electric stackers. The electric pallet jack manufacturer can definitely tell the enterprise that the electric pallet jack, as a very popular equipment at present, is very safe. However, there are also some points to be noted during the operation.

To be on the safe side, the driver should check whether the brake system of the electric pallet jack is normal, whether the emergency power-off button is normal, whether the battery power is sufficient, whether there is damage, etc. Before working, the driver should confirm that it can operate normally. During the operation of the equipment, do not adjust the parts. If you really encounter problems, you must cut off the power supply before checking or repairing. After starting the pallet jack, do not accelerate too fast or brake suddenly. The electric pallet jack manufacturer tells us that this is not only for the safety of the driver, but also for the maintenance of the battery of the electric pallet jack to prevent shortening the battery life.

At the turn, the electric pallet jack must not make a sharp turn at high speed. This is especially true on ramps, otherwise there is a risk of rollover. When driving on wet or slippery roads, slow down when turning and drive carefully. When the pallet jack starts, make sure there is no one beside it and there are no obstacles or potholes on the road. The speed shall not exceed 10km/h when driving outdoors, 5km/h when entering and leaving the plant, workshop and warehouse, and 5km/h when driving indoors. Overload must not be allowed during operation, and the center of cargo shall be on the same line with the center of gravity of the vehicle body, without eccentric loading. Besides, no one can stand on the fork. The electric pallet jack manufacturer reminded that the fork should be lowered to the lowest and the power should be cut off after the work is completed.

Although the electric pallet jack is very safe, there are still some precautions that need more attention from the driver. Enterprises must provide systematic safety training for drivers after purchasing electric pallet jack, which does not mean that electric pallet jack can be purchased for direct operation because of their simple operation. In general, the electric pallet jack is worth buying, which can improve work efficiency and save costs. If the enterprise has any questions about purchasing and safety training, you can consult the electric pallet jack manufacturer.