What Material to Choose for Corrosion-Resistant Pallet Trucks?
In food factories, chemical plants and other similar environments, a common problem often occurs:ordinary pallet trucks rust and corrode until they can no longer be used, forcing purchasers to apply for replacements repeatedly – sometimes as often as every 4 months.This troubles bosses, purchasers and operators alike.The corrosion-resistant stainless steel pallet jack has become the perfect solution.
Stainless steel provides excellent corrosion resistance, making it highly efficient and cost-effective for food and chemical industries.You no longer need to worry about corrosion caused by spills, or sudden cracking and brittle failure of the truck body.
In addition, stainless steel is very easy to clean.After cargo handling, a simple wash restores the truck to a clean, like-new condition, ensuring both practical performance and appearance.
However, not all stainless steel is the same.What material to choose for corrosion-resistant pallet trucks?It depends on the characteristics of different stainless steel grades and your actual working environment.
The three most common grades are 201, 304 and 316.
Mild humid environment: 304 stainless steel is sufficient
Strong acid & alkali environment: 316 stainless steel is recommended
Special hygiene requirements: For food safety and high-cleanliness scenes, use the required grade of stainless steel even if no strong corrosion is present
In short, if you want a long-term, cost-effective solution that reduces replacement frequency and improves efficiency, the stainless steel manual hydraulic pallet truck is the ideal choice.It can fully meet your needs and solve problems in special working environments.
-
Breakthrough improvements in bucket tines and masts"We are a manufacturer specializing in the production of all kinds of standard forklifts and off-road vehicles. We produce a complete range of internal combustion forklift trucks, and they are very easy to use. In the following content, we will introduce the relevant knowledge of the product in detail, I hope it can be helpful to you when you use it.Do you like ?0
Read more -
New energy forklift power system controllerIn the electric forklift power unit, when the forward contactor is closed, the motor is in a forward rotation state; Whereas, when the reverse contactor is closed, the motor is reversed. By changing the direction of the armature current or excitation current, or by changing the polarity of the excitation winding, the commutation control of the motor is realized. However, the use of two sets of excitation windings with opposite windings will lead to a complex structure and an increase in the volume of the motor, so the first two methods are more commonly used in practicalDo you like ?0
Read more -
Electric forklifts vs. internal combustion forkliftsHowever, there are also some drawbacks to internal combustion forklifts. First of all, diesel engines are more expensive to run, especially against the backdrop of the current surge in oil prices. Secondly, the internal combustion forklift is noisy and vibrate, and the operating noise of the diesel engine has an irreversible impact on the human body. In addition, the exhaust gas pollution is serious, even if the processor is installed, it will cause environmental pollution, and it is necessary to clean up the dust regularly, which is more cumbersome to maintain, and can easily lead to oil pollution problems on the site.Do you like ?0
Read more -
What are the daily maintenance of electric forklifts?Electric forklifts are important equipment in warehousing and logistics operations, and regular maintenance is crucial. The following guide provides comprehensive recommendations for electric forklift maintenance:Do you like ?0
Read more -
"Electric Forklift Maintenance: Longer Life and More Efficiency"The above is a brief introduction to the maintenance work of electric forklifts, only the correct maintenance work can ensure the better operation of electric forklifts and improve work efficiency.Do you like ?0
Read more -
"Level 3 maintenance is indispensable! Forklift maintenance strategy"First, the key points of the first-level maintenance of forklifts Carefully check the engine oil quantity, oil viscosity and oil cleanliness; Thoroughly clean the battery and add distilled water if necessary to ensure performance; Examine the appearance and tightness of the fan belt; Check the gearbox, drive axle, working oil pump and water pump transmission device for abnormal noise; According to the regulations, add an appropriate amount of oil or grease to each part of the clutch and brake longitudinal link;Do you like ?0
Read more
