How to maintain the electrical system of walkie stacker?

As everyone who knows about the walkie stacker knows, the walkie stacker is a kind of logistics storage equipment driven by electricity, so the electrical system is very important for the walkie stacker. If there is a fault in the electrical system, it may cause the whole forklift to fail to operate, or even cause an accident. In order to avoid faults to the greatest extent, it is necessary to regularly maintain the electrical system of the walkie stacker. So, how to maintain the electrical system? The pallet stacker manufacturer told you that it should be maintained in this way.

First, let's see how to maintain the controller of the electrical system of the walkie stacker. To judge whether a controller works well depends on its flexibility and accuracy in use. To maintain the controller of the walkie stacker, it is necessary to check whether the contact is melted. If burning is detected, it is necessary to use a fine file or glass sand to rub, and then conduct a comprehensive inspection of the controller regularly. Let's talk about how to maintain the controller in the electrical system. A good controller needs a good contact. Therefore, the pallet stacker manufacturer told you that you need to check whether its controller is sensitive and whether the contact is burnt. If dirt or scars are found, clean them in time.

How to maintain the resistance of the electrical system of the walkie stacker? The first step is to check whether the resistance is broken or damaged, and then remove the dust on the resistance. This is good for resistance heat dissipation. When maintaining the oil pump motor, it should be noted that the oil pump motor should not be overloaded during normal use. If it is necessary to overload or it has already been overloaded, it should be noted that the operation time should not exceed 15s. When maintaining the electrical circuit, check whether the wiring of the electrical circuit is correct, and there should be no wrong connection or short circuit. The pallet stacker manufacturer told us that you should check whether the contact of the connector is good, whether the connection screw is tightened, and whether the solder joint is solid and reliable at all places, without any desoldering.

The above is the specific method to maintain the electrical system of the walkie stacker. When you conduct regular maintenance, you can check one by one according to the above sequence to ensure that the electrical system can work well.The pallet stacker manufacturer reminded that you should pay attention to the role of maintenance.