Industry

What preparations need to be done before operating self loading pallet stacker?

0

Published by NEWTON October 25,2024

Self loading pallet stacker is a very common logistics transportation equipment at present. Now, more and more enterprises are starting to use self loading pallet stackers, and the demand for talents who can operate self loading pallet stackers is increasing. The forklift manufacturer China told the forklift operators that if they want to learn to operate the self loading pallet stacker, they should know what preparations need to be made before operating the self loading pallet stacker.

self loading pallet stacker

Before operating the self loading pallet stacker, be sure to wear labor protection articles. Check whether the surrounding ground is clean and free of stains. This step is to find out whether there is electrolyte, hydraulic oil, gear oil and other fluid leakage in the forklift. Secondly, check whether the fork is cracked, damaged or deformed. Check whether there are cracks, excessive wear, loose parts, ropes and other foreign matters on the outside of the wheel, so as not to affect the driving of the self loading pallet stacker. The forklift manufacturer China reminded that do not forget to open the battery cover, check whether the pressing plate and battery are firmly installed, and whether the wiring is loose.

Check whether the fork lifting of the self loading pallet stacker is normal. After pressing the lift button, listen for abnormal noises. Press the operating handle to the tilting position, gently press the acceleration button, and check whether the self loading pallet stacker can move forward and backward normally. Turn the operating handle left and right three times to check whether the forklift can turn normally. The next step is an important one. Push the handle forward to the vertical position, and then press it down to the horizontal position to check whether the vehicle braking system is normal. After that, the forklift manufacturer China reminded that the emergency power off switch should be pressed to check whether the power can be cut off.

self loading pallet stacker

Many forklift operators who operate self loading pallet stacker will relax their vigilance after working for a period of time, do not wear any labor protection articles, and do not conduct detailed and comprehensive inspection before operation. Preparations before operation are not routine and waste time. It can help us understand the status of the self loading pallet stacker at any time, find and solve problems as soon as possible. Doing these seemingly tedious preparations is crucial to ensure the personal safety of drivers. The forklift manufacturer China recommends that the forklift operators make adequate preparations before each operation.

< >

 

Technical Support: Magic Lamp