Are cheap forklifts steering wheels front or rear?

When cheap forklifts move goods, they need to go back and forth in the factory, going in and out for a while, so the steering of our forklifts is still important since this time. When the forklifts are working in the workshop, there is a lot of goods and little space. Therefore, the general forklift trucks are rear wheels. Electric forklift manufacturers emphasize that the rear wheels also have their own advantages. The rear wheel steering angle is large, and the rear wheel is too small, so the turning radius will become smaller, so that the rotation Become very nimble, and only rear-wheel steering can do this.

Since the cheap forklifts working device is arranged at its front end, when the forklift is fully loaded, the front wheel has a large load (bearing more than 90% of the weight of the cargo and the dead weight of the car body). , so usually forklifts generally use the rear axle as the steering axle, and the performance of the steering system is directly related to the forklift driving safety, work efficiency and the driver's labor intensity.

The advantage of cheap forklifts rear-wheel steering is that the steering angle is large. Forklifts are generally used in workshops and freight yards. There are many goods and small space. The key to being able to intersperse freely in this environment, and only rear-wheel steering can do this. Electric forklift manufacturers stress that in addition, the forklift has a large load when working, and the front wheel almost carries the weight of all the goods. In this case, it will be powerless to turn the front wheel again, and the weight is too large, it is easy to damage the steering mechanical.

In addition, the load of the forklift is very large, and the front wheel carries almost all the weight of the goods. In this case, if the front wheel is steered again, it will be powerless, and the weight is too large, which will easily damage the steering parts. The front wheel is a load-bearing wheel, so the center of gravity should be low. The rear wheel is easy to control the direction and saves effort so the rear wheel is smaller.