Counterbalance forklift truck supplier maintain details of forklift chargers

In the use of counterbalance forklift truck, we often pay attention to the maintenance of the forklift body and battery. Most people will ignore the maintenance of the charger. Some friends may ask: "Does the charger also need maintenance?" The answer given to you by the counterbalance forklift truck supplier is: it needs maintenance. I believe there are not many friends who have such doubts! Below we will give you some knowledge about popular science.

Clean the oil tank, filter screen and pipeline, and recall whether there is any cracking; if not, the counterbalance forklift truck supplier recommends to wipe it with a yarn head and cloth wearing fiber after cleaning. Then clean the torque converter and gearbox, recall whether the parts are worn and replace with new oil; recall the conditions of the components of the start bridge, whether they are tight, and whether there is oil leakage, and clear the air holes.

The next step is to dismantle and inspect the main accelerator, differential, and wheel accelerator, adjust the axial intermittent of the bearing, reduce or replace the lubricant. Check, adjust, and change the front and rear wheels, and the axles. Then clean the brakes and steering gear, and recall the amount of idle turning of the steering wheel.

In addition, cleaning the gear oil pump should not be forgotten to solve the problem of the shelving of multi-way valves, valve stems and valve bodies. Counterbalance forklift truck supplier here remind everyone not to disassemble Qining Valve unless necessary.

It is necessary for everyone to recall whether the steering knuckle is damaged or cracked, the cooperative situation of the steering axle master pin and the steering knuckle, and check the wear of the crossbar and steering arm intersections. To remove rust and paint the rim, wear the inner and outer tires and pads, replace if necessary, and inflate according to the instructions. The tightening state of hand-made effect parts is also a very critical factor. Counterbalance forklift truck supplier recommend adjusting the hand brake lever and foot brake pedal.

If the battery electro-hydraulic does not meet the requirements, it needs to be removed and charged. Clean the water tank and oil radiator. Check the shelf and frame for deformation, etc. Remove and wash the rollers, check whether the accessories are stable, and strengthen the welding if necessary. Dismantle and inspect the lifting cylinder, skew cylinder and steering cylinder, check each sensor, fuse and various opening and closing. The counterbalance forklift truck supplier recommends to adjust it if necessary.

The above is the relevant content of the details of the maintenance of forklift chargers for counterbalance forklift truck supplier. If you have other related questions, you are welcome to call our hotline. A professional will answer your questions 24 hours a day!