How to repair the inner tube of electric forklift?

Electric forklift is a kind of forklift that can be used both indoors and outdoors. When working outdoors, it is inevitable to encounter rough roads. Moreover, tires will become more vulnerable after a long time of work. As a result, the tire is likely to have problems with perforation and breakage. What should we do if we encounter such problems? The most cost-effective way is to repair it yourself. Next, electric forklift manufacturer will tell you how to repair the inner tube.

There are two common methods to repair the inner tube of the electric forklift. One is to repair with fire glue, also known as hot repair, and the other is to repair with raw rubber, also known as cold repair. First, let's talk about repairing with fire glue. Generally, when the range of perforation and fracture of inner tube does not exceed 20mm, it can be repaired in this way. When repairing, first round and file the crack. Then, tear off the protective layer on the surface of the fire glue, stick it on the crack, clamp it with the fire repair clip, pry up and ignite one corner of the nitrocellulose paper in the box, transfer the heat to the film to vulcanize it, and after self cooling, remove the fire repair clip. Electric forklift manufacturer tells us that this is the way to repair with fire glue.

Then let's talk about the method of repairing the inner tube of electric forklift with raw rubber. Under what circumstances can raw rubber be used? Generally, when the inner tube is seriously damaged, it shall be repaired with raw rubber. When repairing, first round and file the crack, and then fill a piece of inner tube skin that matches the crack. Apply raw glue to the damaged area two or three times. Note that each application shall be carried out after the last glue is dried. After the glue is dried, take a piece of raw rubber with an area slightly larger than the damaged part, wipe its surface with gasoline and paste it on the damaged part. The thickness of raw rubber should be 2mm~3mm. Electric forklift manufacturer told us that if the raw rubber is too thick, you can bake it on the fire, heat it to 140 ° C, and slowly thin it.

The above is how to repair the inner tube of electric forklift. As you can see, there are still many operating steps to master, and you can learn slowly in practice. This skill is very useful and can help enterprises reduce the cost of replacing tires. However, the electric forklift manufacturer also reminded that if the tire is seriously damaged, it still needs to be handled by professional maintenance personnel.