As you all know, tires are an important part of the electric forklift. The tires with good quality can make the electric forklift run fast and smoothly, providing guarantee for the safe and efficient operation of the electric forklift. However, the tyres of the electric forklift have a service life, and the specific length of time should be determined according to the wear degree of the tyres of the forklift. If the driver does not care about the wear of the tires of the electric forklift, it may cause a tire blowout and affect the normal operation. So why are the tyres of the forklift for sale seriously worn? The electric forklift manufacturer will tell you about it.

The serious wear of the tyres of the electric forklift is mostly related to the road conditions. The road conditions will affect the friction between the tire and the ground and the load that the tire can bear. If the working conditions of the forklift are relatively complex, the life of the tire may be greatly shortened. Secondly, the load and tire pressure will affect the degree of tire wear. Under a certain load and tire pressure, with the increase of vehicle speed, the deformation frequency of the tire, the vibration intensity of the tire body, and the twisting deformation around and at the side of the tire will also increase. The heat generated by friction per unit time will increase, and the working performance of the tire of the electric forklift for sale will deteriorate. The electric forklift manufacturer told us that this may lead to ply breakage and tread spalling, and increase tire wear.
The corrosion of grease and acid substances will lead to serious wear of the electric forklift. When the tire is corroded by grease and acid, the physical and chemical properties of the tire will change, and the bearing capacity will be greatly reduced. If combined with the impact of high temperature, the tire will be seriously damaged, which is easy to cause a tire blowout. Moreover, the tyres corroded by grease and acid substances will have blocky peeling of the sealing layer, rubber peeling off at the tyre mouth and separation of the tyre cord and rubber of forklift for sale. The electric forklift manufacturer reminded that the patch could not fit with the oily rubber, so even if the tire damage was small, it was unlikely to be repaired.

When using a electric forklift, always pay attention to the tire wear. If serious wear is observed, stop using immediately, find out the cause and repair in time. After using the electric forklift, pay attention to the regular maintenance of tires, which can prolong the life of tires. The electric forklift manufacturer told the forklift operator that the tire is very important for the electric forklift. Maintaining tyres and extending the service life of tyres can save the use cost of electric forklift for sale and improve the work efficiency and quality.
-
Pitfalls to Avoid When Buying a Ride-On Counterbalance StackerKey tips for beginners buying ride-on counterbalance stackers: avoid blind pursuit of low prices; watch for shoddy gantry, frame and battery; choose models by load, lift height and aisle width; focus on steel thickness, welding and balance structure for hDo you like ?0
Read more -
Lightweight Electric Stacker: Replace Manual Models & Double EfficiencyWalkie fully electric stacker is cost-effective for budget-conscious warehouses. Compared with manual models, it’s fully electric (travel & lifting), labor-saving, compact for narrow aisles, easy for beginners, boosting efficiency and reducing labor intensity.Do you like ?0
Read more -
2026 latest semi-electric stacker price list by capacity and lift height. Explai2026 semi-electric stacker prices by capacity and lift height: 1t basic 4500–10000 yuan, 1.5t standard 6000–8500 yuan, 2t heavy-duty 8000–10000 yuan. Price varies with battery, steel and configuration. Choose by budget and actual needs.Do you like ?0
Read more -
Manual Hydraulic Stacker In Stock|Choose Newnewton Forklift2026 manual hydraulic stacker is suitable for short-distance, light-load, low-frequency stacking with high cost-performance and low investment. Newnewton, a direct manufacturer, has sufficient stock for same-day shipping, ideal for budget-limited SMEs.Do you like ?0
Read more -
Can Stand-On Pallet Trucks Climb Ramps? Key Safety Rules to RememberThe climbing ability of stand-on pallet truck depends on the max climbing angle marked by the manufacturer. Follow safety rules: keep forks uphill, low speed, no stopping, turning or reversing, no overloading to avoid slipping or overturning.Do you like ?0
Read more -
Electric Self-Propelled Scissor Lifts: Essential for Workshop MaintenanceSelf-propelled scissor lift is ideal for high-altitude maintenance in factories and workshops. Stable lifting, flexible movement, easy operation, strong stability, long battery life and low failure rate. Suitable for lighting replacement, equipment inspection and pipeline maintenance.Do you like ?0
Read more



