How to prevent the electric stacker from damaging the pallet?

Pallet is a very important logistics storage facility. It is generally used with electric forklift such as electric stacker and electric pallet jack to play a huge role. It can make goods mobile and ready for movement at any time, which greatly facilitates handling and stacking. However, if the electric stacker is operated improperly, it is likely to damage the pallet, affect the work efficiency, and even damage the goods. How to prevent the electric stacker from damaging the pallet? The electric stacker manufacturer will tell you something.

First of all, the precondition to prevent the electric stacker from damaging the pallet is to move slowly. Reducing the speed when handling, stacking and forking goods can not only give drivers more time to think about how to handle goods correctly and reduce errors, but also prevent gantry, elevator, etc. from violently hitting pallets or goods. Secondly, overload or eccentric load shall not be allowed. The carrying capacity of the pallet is limited. If the pallet is overloaded, it is easy to break or damage the pallet. If the pallet is loaded eccentrically, it will exert huge pressure on the pallet and damage the goods. Do not drag or push the pallet. Pushing or dragging the pallet on the ground will bring improper lateral pressure to the pallet and damage the pallet. In addition, the electric stacker manufacturer told us that it might damage the components of the pallet, leading to accidents.

To prevent the electric stacker from damaging the pallet, it is not allowed to turn when the fork is completely withdrawn from the bottom of the pallet. This will cause damage to the longitudinal beam, which is very serious for the pallet. Generally, it is caused by the driver of the electric stacker releasing the load prematurely and turning it out of the pallet. Moreover, when inserting the fork into the bottom of the pallet, it cannot contact the pallet. If the spacing between the fork and the pallet is not well controlled, it is likely to cause the fork to collide with the longitudinal beam, which will damage the pallet's life. The electric stacker manufacturer reminds that before lifting the pallet, the fork spacing should be adjusted to spread the fork to disperse the load.

Finally, when driving the electric stacker and inserting the fork into the bottom of the pallet, make sure that the root of the fork is as close to the pallet as possible, and the fork tip is as close to the other end of the pallet as possible. This will prevent the pallet from slipping or falling and make the pallet more stable. The above is the method to prevent the electric forklift from damaging the pallet. It can be said that every electric forklift driver must pay attention to this. The electric stacker manufacturer reminds that it is the key to prevent the electric stacker from damaging the pallet and to ensure the driver's safe operation to concentrate on work and not be impatient.