Function introduction of each component of semi-electric stacker

Many companies often choose a semi-electric stacker when carrying out a single pallet stacking operation. The semi electric stacker can walk manually, and it will be electric lift. Compared with all-electric stackers, the cost is low and does not occupy too many enterprises. Capital, and the unitized pallet stacking is safe and efficient, and it can fully demonstrate its outstanding flexibility and environmental protection performance. In view of the excellent semi-electric power stacker, let's take a comprehensive look at this model.

Let's first look at the working principle of the semi electric stacker: when the semi-electric lift is raised and lowered by the joystick, the pump station is controlled to work, and the inner and outer mast and the sliding frame are directly driven by the cylinder to lift, so that the fork is lifted.

The structure of the machine parts of the semi electric stacker: battery, motor, hydraulic pump station, piston rod, chain, wheel, handle, mast, fork and other parts.

Drive of semi-electric stacker: The semi electric stacker is driven by manpower and adopts special craft nylon or polyurethane wheels, which are wear-resistant, pressure-resistant and quiet. Manual control has its advantages, flexible operation, free turning and straight conversion.

The steering operation of the semi electric stacker: the steering control handle acts on the steering wheels on both sides through the steering mechanism, which is lighter and more flexible when turning. Therefore, the steering control handle can be directly turned through the required angle.

The circuit of the semi-electric stacker: powered by the battery, the battery capacity or voltage is displayed, and it has a low-voltage protection function, which can more intuitively reflect the working status; the key switch controls the entire circuit, and the built-in charger is equipped with a transfer relay switch to charge It will automatically cut off the working power supply at any time, which is safer and more reliable. The selection of the wiring harness satisfies the operation requirements of the entire circuit. The selection of all electrical components is safe and reliable.

The hydraulic circuit of the semi-electric stacker: when the fork needs to be lifted or lowered, by adjusting the hydraulic pull rod, the pump station can drive the inner and outer mast and the sliding frame to move relative to each other through the oil cylinder, which is the lifting and lowering of the fork. The pressure limiting valve is included in the hydraulic pump to protect the vehicle and hydraulic system in case of overload.

The parking brake of the semi-electric stacker: Through the operation of the foot brake, the brake directly acts on the universal wheel, which immediately acts as a brake.

The above is an introduction to the functions of various parts of the semi-electric stacker shared by the pallet stacker supplier. I hope it will be helpful to everyone when purchasing the stacker.