How does the electric pallet truck operate?

Starting of the electric pallet truck
1. Plug in the battery plug of the electric pallet truck.
2. Turn on the emergency power switch of the electric hydraulic pallet truck.
3. Turn on the key switch of the electric hydraulic pallet truck.
The advancement of electric pallet trucks
1. Use both hands to press the operating handle of the electric hydraulic pallet truck back to 0°-90°.
2. With your thumb, gradually turn the direction and speed control button of the electric hydraulic pallet truck backwards.
3. The electric hydraulic pallet truck runs backwards.

Deceleration of electric pallet trucks
1. Slowly release your thumb, the direction and speed control button of the electric hydraulic pallet truck will automatically return to the position, and the speed of the electric hydraulic pallet truck will decrease.
Steering of electric hydraulic pallet truck
1. Hold the left and right handles of the control handle of the electric hydraulic pallet truck with both hands, press down to the inclined position, and move the control handle left and right to realize the steering of the electric hydraulic pallet truck.
2. When turning left, the electric hydraulic pallet truck will turn left; when turning right, the electric hydraulic pallet truck will turn right.
 

Braking of electric pallet truck
1. When the thumb leaves the direction and speed control button of the electric hydraulic pallet truck, move the handle to the horizontal or vertical position to realize the braking of the electric hydraulic pallet truck.
Parking of electric hydraulic pallet truck
1. The electric pallet truck slows down, that is, the thumb gradually loosens the direction and speed control button of the electric hydraulic truck.
2. Restore the operating handle of the electric hydraulic pallet truck to the vertical position.
3. The fork of the electric hydraulic pallet truck is lowered to the lowest position.
4. In the "OFF" position of the key switch of the electric hydraulic pallet truck, press the emergency power-off switch of the electric hydraulic pallet truck, unplug the battery, and remove the key for safekeeping.
 

Loading and unloading of electric pallet trucks
1. The electric hydraulic pallet truck approaches the cargo carefully.
2. Adjust the height of the forks of the electric hydraulic pallet truck so that the forks are as far as possible into the pallet.
3. The electric hydraulic pallet truck lifts the cargo a few centimeters and confirms whether the cargo is firm.
4. The electric hydraulic pallet truck leaves slowly.
5. The electric hydraulic pallet truck lowers the cargo to a low position.
 

Unloading of electric pallet trucks
1. The electric hydraulic pallet truck is close to the place where the goods are placed.
2. The electric hydraulic pallet truck lifts the cargo to the correct height.
3. The electric hydraulic pallet truck moves forward, puts the cargo on the unloading position, and then stops.
4. After confirming that the cargo is unloaded directly above, the fork of the electric hydraulic pallet truck will slowly lower until the fork is withdrawn from the cargo.
5. Lower the fork of the electric hydraulic pallet truck to a position 15-20cm above the ground.