How to solve the poor braking function of the reach forklift?

Like car, if the brake failure occurs on the reach forklift, the consequence is unimaginable. It requires the driver to have sufficient operating knowledge and strong strain capacity. However, it is not only braking failure that requires great vigilance. Poor braking will also bring troubles to the normal operation of forklift trucks, which requires high attention of the driver and reasonable response. What are the manifestations of poor braking and how should we deal with them? Electric forklift manufacturer will provide the solution.

If the brake pedal is pressed continuously, if the pedal is raised and pressed continuously without lifting your foot, you can also feel the pedal's elasticity. You can try to press the pedal again later. If the condition remains unchanged, air is evidenced in the brake system and exhaust is required. How to exhaust the reach forklift? The exhaust sequence should be from the brake master pump to the brake sub-pump, discharging one by one. When exhausting, two people are needed to cooperate. One person will press the brake pedal and the other will unscrew the exhaust screw. After the brake fluid mixed with air is released, tighten the exhaust screw and release the brake pedal. The electric forklift manufacturer told you that it would be possible to exhaust the air several times.

If one foot of the brake pedal is ineffective, the pedal can be continuously pressed to rise and the braking force is extremely high, which proves that the pedal has too much self-travel or that the friction pad has too much clearance with the brake hub. At this point, the self-travel of the pedal of the reach forklift should be checked before adjusting the gap between the friction plate and the brake hub. If one foot of the brake pedal does not work, the pedal can be continuously pressed to rise, but feel no pedal elasticity, and there is a feeling of sinking, it proves that there may be a leak in the forklift truck or that the brake master pump outlet valve is not tightly closed. The manufacturer of the electric forklift manufacturer recommends that you check the line connections for leaks at this time. If this problem exists, tightening, welding or replacement measures should be taken.

Drivers should not be anxious when encountering poor braking of reach forklift. These problems are very common and can be investigated and solved in accordance with the above methods. Brake system is an essential part of electric forklift truck and closely related to operation safety. Electric forklift manufacturer recommend that drivers regularly inspect and maintain the brake system, master emergency handling knowledge, accumulate experience and improve work efficiency while ensuring safe operation.