Industry

Precautions for the battery charging process of the small electric forklift

0

Published by NEWTON October 25,2024

small electric forklift

The small electric forklift battery cannot be completely discharged, and should be charged until the charger returns the charging completion signal. In fact, there are still a lot of precautions related to the charging of forklift batteries. Next, learn about the relevant content with forklift manufacturers in china. So that we can avoid stepping on thunder when charging the device in the future.

Generally, the connection between the charger and the power supply is usually about 14-16 hours. After charging, the voltage of each single battery is about 2.7V, and the electrolyte density of each single battery will reach 1.27-1.29kg/1.25℃. Here forklift manufacturers in china suggest that everyone who has used a small electric forklift should charge it in time, and do not place the equipment for a long time. It is necessary to charge and maintain the equipment after a short period of time. Here are some things to keep in mind while charging:

Invisible batteries should be connected to an open flame, so as to prevent the gas from causing an explosion, causing a fire, and causing unnecessary economic losses and personal injury.

When charging, it should be in a well-ventilated environment. Forklift manufacturers in china suggest to lift the cover of the small electric forklift, or take the battery out of the forklift.

Temporary wiring is not allowed.

Make sure that the insulator tightly wraps the charging cable to ensure the personal safety of the operator.

The surface of the small electric forklift battery should be kept clean, and the surface of the battery should be wiped with an antistatic cloth.

small electric forklift

Do not place tools or other metal objects on the battery.

During charging, the temperature of the electrolyte should not be higher than 45°C.

After the small electric forklift of forklift manufacturers in china is charged, the electrolyte level should be checked to see if it is 15mm higher than the separator. In general, distilled water should be replenished once a week.

Avoid contact with the skin and acid. If it comes into contact with the skin, rinse with plenty of soapy water, or seek medical attention in time.

Used batteries should be disposed of according to local regulations.

Forklift manufacturers in china would like to talk about the conversion of small electric forklift batteries. We need to start from the following four aspects:

1) Remove the battery solid screw

2) Remove the cables from the battery terminals.

3) Slide out or hang out the battery.

4) Install the small electric forklift battery according to the reverse process indicated below, tighten and connect correctly.

< >

 

Technical Support: Magic Lamp