What impact does the low temperature environment have on the small electric fork

What are the precautions for the use of small electric forklifts for cold storage? Nowadays, more and more small electric forklifts are used in cold storage, especially some large cold storage. Warehouse forklifts are indispensable handling equipment in cold storage. Since cold storage is different from ordinary warehouses, Jiangsu electric forklifts work in a low temperature environment and the conditions are relatively special, so some problems need to be paid attention to. The following will explain the precautions for the use of small electric forklifts for cold storage.

Due to the particularity of the cold chain industry, forklift manufacturers in chinas remind the use of mini electric forklifts to consider their ability to work in a low temperature environment. When using an electric forklift in a low temperature environment, the following aspects should usually be considered.

1. The influence of low temperature environment on the battery capacity of storage forklifts.

The calibration of the storage forklift battery capacity is based on an ambient temperature of 20°C and standard air pressure. The lower the ambient temperature, the smaller the actual battery capacity that can be used. Generally speaking, in a low temperature environment of -20°C, the actual capacity of the battery is only 80% of its nominal capacity. Therefore, an electro-hydraulic forklift that can meet the service time requirements in a normal temperature environment may not be able to meet the service time requirements in a low temperature environment. The battery capacity needs to be increased appropriately.

2. The influence of temperature difference on small electric forklift

In many cases, mini electric forklifts need to work alternately in low temperature and normal temperature environments. In this case, it is easy to produce condensed water, thereby causing damage to electrical components. forklift manufacturers in chinas must take this into consideration in the design and maintenance of forklifts. Otherwise, small electric forklifts are likely to often fail and cannot be used normally.

3. The influence of humidity on the battery of small electric forklift

From the analysis of the failure rate of the electric forklift battery, the technical maintenance of the battery should be the top priority. If the host device fails, channel conversion, system conversion, etc. can be performed to ensure smooth communication. Unless it is a failure of the controller part, it will generally not cause the paralysis of the entire system. Communication host equipment requires DC uninterrupted power supply.